|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Milling |
Home >
Milling > HIGH PERFORMANCE > CARBIDE > STEEL
|
 |
|
|
|
|
2 FLUTE BALL NOSE with TAPER NECK X-POWER PRO GM963
|
|
|
|
|
|
|
|
 2 FLUTE BALL NOSE with TAPER NECK X-POWER PRO GM963 |
| EDP |
Radius of Ball Nose R (±.001) |
Mill Diameter (D1) |
Shank Diameter (D2) |
Length of Cut (L1) |
Under Neck Parallel Length (L4) |
Length Below Shank (L3) |
Overall Length (L2) |
Neck Diameter (D3) |
Taper Neck Angle(θ) |
| GM963004 | R1/32 | 1/16 | 1/4 | 5/32 | 15/64 | 7/8 | 2-3/8 | 0.096 | 1° 30' |
| GM963901 | R1/32 | 1/16 | 1/4 | 5/32 | 15/64 | 1-5/8 | 3-1/8 | 0.208 | 3° |
| GM963008 | R1/16 | 1/8 | 1/4 | 1/4 | 21/64 | 2/1/16 | 3-5/8 | 0.216 | 1° 30' |
| GM963012 | R3/32 | 3/16 | 3/8 | 3/8 | 29/64 | 2-3/8 | 4-3/8 | 0.288 | 1° 30' |
| GM963016 | R1/8 | 1/4 | 3/8 | 1/2 | 5/8 | 2/1/16 | 4-3/8 | 0.325 | 1° 30' |
| GM963020 | R5/32 | 5/16 | 1/2 | 9/16 | 11/16 | 2/1/16 | 4-3/4 | 0.385 | 1° 30' |
| GM963024 | R3/16 | 3/8 | 1/2 | 11/16 | 13/16 | 2-3/8 | 5/1/16 | 0.458 | 1° 30' |
|
|
 |
|
